
Healthmark Watermark™
The Healthmark Watermark™ is a bumper sticker sized liquid crystal thermometer with a "water fill line" that adheres to the inside of a manual and or ultrasonic soaking bath, tub, sink or basin. Following the instructions of your detergent manufacturer, determine the appropriate water level for the bath. In the write in space, note the volume of water. Staff should then be instructed as to the amount of detergent to add to the bath, in accordance with the detergent manufacturer's IFU. Unique to the Healthmark Watermark™ is an easy to read liquid crystal thermometer located below the fill line. By monitoring the reported temperature on the thermometer, staff can be sure that the solution is in the proper temperature range as dictated by the detergent manufacturer's IFU. Use the Healthmark Watermark™ when submerging instruments in an manual and or ultrasonic bath, tub, sink, or basin to improve compliance with recommended cleaning parameters of temperature and dilution. The Healthmark Watermark™ is 12"w x 3"h.
Support Documents
Related Products
- Healthmark Watermark™
- TEMP-WiFi-TH
- TEMP-WiFi-TP
- Illuminate the Temperature of Manual Baths and Ultrasonic Cleaners with TempaChek™-LC
- Illustrate the Temperature of the Initial Rinse, Enzyme Stage and Detergent Wash of the Automated Washer with TempaChek™-90
- Picture the Thermal Disinfection Temperature of the Automated Washer with TempaChek™-170
- Graph the Complete Temperature Profile of the Automated Washer with TempaChek™-DL


